马蹄形过水断面正常水深计算的遗传算法

马蹄形过水断面是无压输水隧洞中常采用的断面形式之一 ,因其几何形状复杂 ,水力计算困难。目前常采用的方法有试算法、图解法和迭代法 ,这些方法由于计算量大且精度不易保证 ,不便于在生产实践中应用推广。将马蹄形过水断面正常水深计算转化为非线性优化问题 ,采用实数编码的遗传算法进行求解 ,实例计算表明该方法精度高、通用性强、操作简便 ,便于在生产实践中应用。     

梯弧形明渠水力最佳断面的设计

该文讨论了梯弧形明渠输水断面的特点,导出了梯弧形明渠水力最佳断面的几何尺寸及水力要素的计算式;论证了梯弧形比工程中常用的梯形断面,具有较好的水力经济性,更大的边坡稳定性及更小的水流冲淤性等优点,值得在工程实践中推广使用。文中还编制了不同边坡系数值时,设计计算梯弧形水力最佳断面尺寸的系数表,使运算简捷方便,最后给出了算例。     

大豆蛋白质单螺杆挤压熔体输送段的数值模拟

采用控制容积法，对大豆蛋白质单螺杆挤压的熔体输送段进行了准三维的数值模拟，并考察了工艺参数对挤压过程的影响。研究结果表明，沿流速度呈现明显的拖曳流和压力流复合的特征；无量纲温度及其波动随着螺杆转速的增高而升高，随着含水率的增大而降低；压力梯度有一个沿流向发展的过程；粘度在螺槽横截面上呈现近壁面处小、中间位置大的凸起状分布特性。模拟结果比较真实地反映出大豆蛋白质各个挤出变量的响应规律。     

土地整理项目中沟渠土方量计算方法研究及应用

土地整理项目规划设计中,沟渠土方量计算一直没有引起足够重视,准确快速地计算沟渠土方量对开展规划设计、控制总投资具有很重要的意义.为此,研究了利用平均断面法结合办公处理软件EXCEL计算沟渠土方量,并以2006年国家投资湖北省谷城县冷集镇基本农田土地整理项目为具体案例进行了计算,为土地整理中沟渠土方量的研究提供参考依据.     

U形混凝土衬砌渠道断面的一种优化设计方法

明渠衬砌Ｕ形断面渠道设计中仍存在一定的缺陷。以总费用（或投资）最小为目标，建立了Ｕ形渠道断面优化设计模型，采用比例系数法，将优化设计数学模型简化，用ＰＣ—１５００计算机求解了衬砌Ｕ形断面渠道在工程费用较小时的断面设计参数。     

AN ANALYSIS OF AXISYMMETRY SHELLS OF SUSPENSION CROSS SECTION BY A METHOD OF INTEGRAL EQUATION IN INITIAL PARAMETER FORM

In this paper,the axisymmetrical shells of suspension crosssection is studied by means of integral equation in initial parameter form.An example of the shells under uniformly distributed load is calculated.     

Fault Section Diagnosis Algorithm of Distribution Networks Based On Topology Identification

An algorithm of fault section diagnosis based on topology identification for distribution networks is presented. By decomposing the topologic matrix which describing the distribution network into two parts,one part only contain the complex coupling factor ,and the other ignore the complex coupling factor. Using this method, the fault zones in distribution network can be identified and isolated efficiently, and the vertexes of the zones can also be identified automatically. This approach adapts to the changefully network structures.     

The Application of Pre-splitting Blasting to Excavation on High Slope in Soft Rock Section

Based on analyzing about blasting mode of slope in the construction of road, the paper shows that pre splitting blasting is mostly suitable in the section of severely weathering soft rock with developed joints and fractures, introduced the laying out about the hole of pre splitting blasting that can apply in the high slope of the expressway in the section, and designed the parameter. The practice shows that it gained favourable effect by this method.     

大型灌区矩形多纵梁渡槽结构分析与优化

为了进一步研究矩形多纵梁渡槽结构受力分布规律,以黑龙江省某大型灌区输水渡槽为例,采用ANSYS有限元分析方法对其进行受力分析。结果表明,增加渡槽侧墙及底板厚度能够有效提高渡槽整体受力条件,在满足各项应力及变形指标情况下可适当减小纵梁的高度以节省工程量。该项目的实施有效地解决了该大型灌区水资源匮乏等问题。     

The origin of polyploids via 2n gametes in Vaccinium section Cyanococcus

Summary The production of 2n pollen (pollen with the sporophytic chromosome number) was evaluated in 4x and 6x taxa of Vaccinium section Cyanococcus. Mean frequencies of 2n pollen producers were 17.1% and 8.3% in natural 4x and 6x populations, respectively. The frequency of 2n pollen producers in the 4x species ranged from 8.6% (V. angustifolium) to 23.8% (V. pallidum). Level of 2n pollen production was genotypically variable (1% to 37.4%). The widespread occurrence of 2n pollen in 2x, 4x and 6x taxa suggests that sexual polyploidization was widespread and responsible for the origin of the polyploid species found in this genus. The frequency of 2n pollen producers was not significantly different between the 4x species and their putative 2x ancestors. These results support the origin of 4x and 6x taxa as a consequence of sexual polyploidization. Polyploids derived from sexual polyploidization would be expected to have increased fitness and flexibility due to the mode of 2n pollen formation. In blueberry species the predominant mode of 2n pollen formation is genetically equivalent to a first division restitution mechanism (FDR). FDR 2n pollen transmits a high percentage of the heterozygosity and a large fraction of the epistasis from the 2x parent to the 4x offspring.